Do you have some? chairs in the dining room that you would like to give a new look? Over time, upholstery tends to wear out and does not always fit in with the new style we have in mind for our home. Reupholstering them is then the best option but, How to upholster chairs with backrests?
Upholstering a chair with an upholstered backrest takes more work than updating the look of a simple chair, but don't let that put you off! At Decoora we explain to you today What materials do you need and what steps should you follow? to upholster these chairs and transform the look of your dining room.
Necessary materials and supplies
To be able to upholster a chair you will need a series of Essential materials and supplies and others that will help make the job easier. Get them all and have them at hand when you are ready to discuss the upholstery project so you don't waste time. Here is the list:
- fabric of your choice
- Foam, wadding or miraguano.
- Measuring tape
- Scissors
- Cutter
- Stapler
- Staple remover.
- Straps
- Hammer
- Hot glue gun or fabric glue
Choosing the fabric
One of the main elements for upholstering a chair is the fabric and its choice is very personal. Regardless of the style we are looking for for our chairs, however, it is advisable to opt for Durable and easy-to-clean fabrics, such as cotton or linen, so you can enjoy them for longer.
The most popular fabrics for upholstering chairs are: fabrics of natural fibers such as cotton or linen, synthetic fiber fabrics such as polyester or others such as chenille or highly resistant velvet. Remember that depending on the size of the chairs and the width of the fabrics, you will need around 2 meters of fabric per chair. Keep this in mind when calculating your budget.
Step by step to upholster chairs with backrests
Now that you know what materials you need, it's time to find out how to upholster chairs with backrests. Although, at first, it may seem a bit complicated, Once you upholster a seat, you will lose your fear of it. It will take you a few hours as you will have to upholster both the seat and the backrest, but you will have new chairs when you are done! Follow our step-by-step instructions so you don't forget anything:
Prepare the chair
The first step is to prepare the chair and although it may seem like a silly step, it is crucial to achieve a good result. Carefully separate the seat and back of the chair. Already got it? Now carefully remove the old fabric, using a staple remover and a box cutter if necessary, so as not to damage the foam underneath the fabric. If the foam is in good condition, you won't need to replace it. If, on the other hand, it is bad, remove it too so you can replace it.
Ideally, you should remove the fabric from at least one of the chairs before purchasing the materials. You will be able to know what condition the foam is in and if it is convenient to buy new foam to replace it.
Replace the foam
If the foam is in poor condition, start by replacing it. To do this, place the foam or wadding, several layers if necessary, and staple it to the frame on all four sides. Then, once you are sure that it is well fixed, cut off the excess material.
Measure and cut the fabric
The third step to upholster chairs with backrests is to measure and cut the chosen fabric. Keep in mind that in addition to covering the seat or backrest, You will need some more fabric to hem and attach it to the frame. of the chair. Take the measurements of the seat and back without rushing and cut the fabric.
Place the fabric
Now comes the key point of the whole process: placing the fabric on the seat. Place the seat on top of the fabric and stretch it from the center to the sides. to keep it tight. In this case, it will be very helpful to have the help of a second person if you have never done it before.
Using a stapler, secure the fabric to each side of the chair. making sure the fabric is taut. Then, repeat the process with the backrest. The first seat may not be perfect, but as you progress, you will perfect the technique.
Cut off excess fabric
Once the fabric is secured, cut off the excess fabric and create a sort of hem so that the back of the seat and backrest are better finished. You can use a stapler to secure it or glue, whichever is more comfortable for you. It will depend on whether you are looking for a more or less fine result.
Mount the chair
Now that you have both the seat and back upholstered, reassemble the chair, make sure everything fits properly, and enjoy the result. Is there something that didn't turn out the way you wanted? If the fabric wasn't quite taut or a wrinkle has crept in and spoiled the result, take the seat or back apart and try to redo it.